Honda PRELUDE Owner's Manual page 47

3. Press and hold the SET/decel
button on the steering wheel until
the CRUISE CONTROL light on
the instrument panel comes on.
This shows the system is now
activated.
The set speed may vary slightly,
particularly on hills.
Changing the Set Speed
You can increase the set cruising
speed in either of two ways:
Press and hold the accel/
RESUME button. The car will
accelerate slowly. When you reach
the desired cruising speed, release
the button.
Push on the accelerator pedal. Ac-
accel/
celerate to the desired cruising
RESUME
speed and press the SET/decel
SET/decel
button.
Steering Wheel Controls
You can decrease the set cruising
speed in either of two ways:
Press and hold the SET/decel
button. The car will decelerate.
Release the button when you
reach the desired speed.
Tap the brake or clutch pedal
lightly with your foot. The
CRUISE CONTROL light on the
instrument panel will go out.
When the car slows to the desired
speed, press the SET/decel button.
The car will then maintain the
desired speed.
Instruments and Controls
CONTINUED