Honda PRELUDE Owner's Manual page 189

JACKING
POINT
9. Locate the jacking point nearest
the tire you need to change. It is
pointed to by an arrow molded into
the underside of the body. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting on the
jack notch.
WHEEL EXTENSION
WRENCH
10. Use the extension and wheel
wrench as shown to raise the car
until the flat tire is off the ground.
Changing a Flat Tire
11. Remove the wheel nuts and flat
tire. Temporarily place the flat tire
on the ground with the outside
surface of the wheel facing up.
The outside surface contacting the
ground could damage the wheel
surface.
Taking Care of the Unexpected
CONTINUED