Honda PRELUDE Owner's Manual page 170

Lights
5. Push the bulb holder into the side
marker assembly and turn it clock-
wise until it locks.
6. Test the side marker to make sure
the new bulb is working.
7. Put the side marker assembly into
the bumper. Make sure the tab on
the side marker assembly fits into
the bumper slot. Tighten the
mounting screw.
Maintenance
Replacing a Front Turn Signal
Light Bulb
SCREW
1. Use a Phillips-head screwdriver to
loosen the turn signal assembly's
mounting screw.
2. Remove the turn signal assembly
from the bumper.
TURN SIGNAL ASSEMBLY
BULB
BULB HOLDER
3. Remove the bulb holder from the
turn signal assembly by turning it
counterclockwise.
4. Remove the burned out bulb from
the socket by pushing it in and
turning counterclockwise until it
unlocks.
Install the new bulb.