System Panel Connector - Asus A7V8X-X User Manual

12. System panel connector (20-pin PANEL)
This connector accommodates several system front panel functions.
A7V8X-X
®
A7V8X-X System Panel Connectors
• System Power LED Lead (3-1 pin PLED)
This 3-1 pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep
mode.
• System Warning Speaker Lead (4-pin SPKR)
This 4-pin connector connects to the case-mounted speaker and allows you to
hear system beeps and warnings.
• System Management Interrupt Lead (2-pin SMI)
This 2-pin connector allows you to manually place the system into a suspend
mode, or "green" mode, where system activity is instantly decreased to save
power and to expand the life of certain system components. Attach the case-
mounted suspend switch to this 2-pin connector.
• ATX Power Switch/Soft-off Switch Lead (2-pin PWR)
This connector connects a switch that controls the system power. Pressing the
power switch turns the system between ON and SLEEP, or ON and SOFT
OFF, depending on the BIOS or OS settings. Pressing the power switch while
in the ON mode for more than 4 seconds turns the system OFF.
• Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting
the system without turning off the system power.
• Hard Disk LED (2-pin IDE_LED)
This 2-pin connector connects to the front panel HD LED and lights up on
every read/write activity of any of the disc drives connected to the primary or
secondary IDE slots.
1-20
Speaker
Connector
Power LED
Reset SW
IDE_LED
ATX Power
SMI Lead
Switch*
Requires an ATX power supply.
*
Chapter 1: Motherboard Information