Installing The Mcs Ii System - N-Com MCS II Instruction Manual

3. INSTALLING THE MCS II SYSTEM

8
Fig. 1
Fig. 3
Fig. 2
 Remove the "N-Com" protection
plate located on the helmet
shell (Fig. 1)
helmet chin guard (flip up
helmets).
 Remove the right and left cheek
pads from the helmet (see
specific instructions provided
in the user manual of the
helmet).
 Remove the Noise Reducers from
the two cheek pads, and tear
off the pre-cut
equipped).
and open the
plastic (if