Table of Contents
Advertisement
5.3.5 Installation of NVIDIA MCP MAC Driver: Win98
1. Go to the Device Manager.
2. Select "PCI Ethernet controller" in "Other Devices."
3. Click on "Properities."
4. Click on "Driver."
5. Select "Update Driver."
6. Select "Search for a better driver than the one your device is using now"
option.
7. Click on "Specify the location" and then type or browse for the path on the
CD-ROM Drive:\Drivers\Chipset\Nvidia\103\win9xme. This installs the
driver.
8. Click "Next."
9. You should see that the "NVIDIA nForce MCP networking Adaptor" is
detected.
10. You do not need to restart if you need to install more drivers.
11. Continue to install other drivers if needed.
5.3.6 Installation of NVIDIA GeForce2 GPU Driver: Win98
1. Go to the Device Manager.
2. Select "Standard PCI Graphics Adapter(VGA)" in "Display Adapter."
3. Click on "Properities."
4. Click on "Driver."
5. Select "Update Driver."
6. Select "Search for a better driver than the one your device is using now"
option.
7. Click on "Specify the location" and then type or browse for the path on the
CD-ROM Drive:\Drivers\Chipset\Nvidia\103\win9xme. This installs the
driver.
8. Click "Next."
9. You should see that the "NVIDIA GeForece2 Integrated GPU" is detected.
10. You do not need to restart if you need to install more drivers.
11. Continue to install other drivers if needed.
72
Chapter 5: Software support
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the A7N266-VM and is the answer not in the manual?