Table of Contents
Advertisement
12) CPU Fan Connector (3 pin CPU_FAN)
Three fan connectors support cooling fans of 350mA (4.2 Watts) or less.
Orient the fans so that airflow flows across the onboard heat sinks instead of
expansion slots. The fan wiring and plug vary depending on the type
employed. Connect the fan cable to the connector, ensuring that the black
wire matches the ground pin. (Use the "Rotation" signal only with a specially
designed fan with a rotation signal. You can monitor the Rotations Per Minute
(RPM) using ASUS PC Probe (see 6. SOFTWARE REFERENCE).
WARNING!
Lack of sufficient airflow within the system could cause damage to the
motherboard. These are not jumpers, do not place jumper caps over
these connectors!
A7N266-VM 12-Volt Cooling Fan Power
13) ASUS Front Panel Audio Connector (10 pin AAPANEL)
This connector supports an optional front audio panel. Attach the Front Panel
audio cable to the AAPANEL connector for audio control.
A7N266-VM Audio Panel Connector
28
Make sure to connect the fan cables to the fan connectors.
A7N266-VM
CPU_FAN
®
A7N266-VM
®
LineOut_FR
LineOut_FL
GND
+12V
Rotation
AAPANEL1
MIC
AGND
MICPWR
NC
LineOut_RR
NC
LineOut_RL
Chapter 2: Hardware information
Hide quick links:
Advertisement
Table of Contents
