Panasonic DMR-ES15EB Quick Setup Manual page 2

STEP 1 Connection
Use of the supplied RF coaxial leads
To prevent interference patterns from appearing on your TV, use only the supplied RF coaxial leads when you connect this unit to your
TV and aerial outlet or aerial lead, as shown in connection types A-B.
• Keep the RF coaxial leads as far away as possible from other leads.
• Do not roll up the RF coaxial leads.
• Before connection, turn off the mains for all connected equipment and read the appropriate operating instructions. Be sure to
read the Caution for AC Mains Lead on page 2 of Operating Instructions.
• Choose from one of the connection types A-B that suits your requirement.
Connecting to a television only
Using a fully wired 21-pin Scart lead
• You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➔ page 38 of Operating Instructions).
• You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
Required setting
"AV1 Output" in the Setup menu (➔ page 40 of Operating Instructions)
Television's rear panel
VHF/UHF
RF IN AV IN
RF coaxial lead
(included, black)
Fully wired 21-pin
Scart lead
(For Q Link functions)
Use one of the RF coaxial lead (black or grey) to connect this unit's RF IN terminal to your aerial socket or aerial lead.
To the aerial
After completing the above connections, proceed to the TV Tuning (➔ page 4).
To household mains socket
To household mains socket
(AC 220 V to 240 V, 50 Hz)
AC mains lead
(included)
Connect only after all other
connections are complete.
This unit's rear panel
This unit
RF coaxial lead (included, grey)
or
RF coaxial lead (included, black)
- 2 -
Connecting to a television and Satellite/Digital terrestrial receiver
Using a fully wired 21-pin Scart lead
• You can use a variety of Q Link functions by connecting the unit to a Q Link compatible television (➔ page 38 of Operating Instructions).
• You can enjoy high-quality viewing by connecting the unit to an RGB compatible television.
Required setting
"AV1 Output" and "AV2 Input" in the Setup menu (➔ page 40–41 of Operating Instructions)
Television's rear panel
VHF/UHF
RF IN AV IN
To the
aerial
RF coaxial RF coaxial lead
lead (included, black)
RF coaxial
lead
(included,
black)
RF AV OUT
OUT
RF
IN
Satellite/Digital terrestrial
receiver's rear panel
To view satellite/digital terrestrial programmes
Press [INPUT SELECT] to select the input channel "AV2" or put this unit in standby mode.
To record satellite/digital terrestrial programmes
Refer to "Recording from a satellite/digital terrestrial receiver" (➔ page 23 of Operating Instructions).
After completing the above connections, proceed to the TV Tuning (➔ page 4).
To household mains socket
To household mains socket
(AC 220 V to 240 V, 50 Hz)
AC mains lead
(included)
Connect only after all other
Fully wired 21-pin
connections are complete.
Scart lead
(For Q Link functions)
This unit's rear panel
Fully wired 21-pin Scart lead
To household mains socket
(For External Link function)
- 3 -