Dukane 8952P User Manual page 49

Item
MY BUTTON
MY SOURCE
(continued on next page)
This item is to assign one of the following functions to MY BUTTON
-(1 1 to 4 4 ) on the remote control (
(1) Use the ▲/▼ buttons on the MY BUTTON menu to select a MY BUTTON - (1
to 4) and press the ► button to display the MY BUTTON setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following functions to the
chosen button.
• COMPUTER IN1: Sets port to COMPUTER IN1
• COMPUTER IN2: Sets port to COMPUTER IN2
• BNC: Sets port to BNC
• HDMI: Sets port to HDMI
• DVI-D: Sets port to DVI-D
• COMPONENT: Sets port to Component (Y, Cb/Pb, Cr/Pr)
• S-VIDEO: Sets port to S-VIDEO
• VIDEO 1: Sets port to VIDEO 1
• VIDEO 2: Sets port to VIDEO 2
• INFORMATION: Displays the INPUT -INFORMATION- (
the NETWORK -INFORMATION- (
• AUTO KEYSTONE : Performs automatic keystone distortion
47 ).
correction (
• MY MEMORY: Loads one of adjustment data stored (
When more than one data are saved, the adjustment
changes every time the MY BUTTON
When no data is saved in memory, the dialog "No
saved data" appears.
When the current adjustment is not saved to
memory, the dialog as shown in the right appears.
If you want to keep the current adjustment, please press
the ► button to exit. Otherwise loading a data will overwrite the current adjusted condition.
• ACTIVE IRIS: Changes the active iris mode.
• PICTURE MODE: Changes the PICTURE MODE (
• FILTER RESET: Displays the fi lter time reset confi rmation dialogue (
• TEMPLATE: Makes the template pattern selected to the
TEMPLATE item (
• P by P SWAP: Swaps the picture of right side with left side in the P by P
mode.( 27 )
• LENS MEMORY-1: Loads the LENSMEMORY-1
• LENS MEMORY-2: Loads the LENSMEMORY-2
• LENS MEMORY-3: Loads the LENSMEMORY-3
It shifts the lens position in accordance with the memory saved for
the type of the present lens unit.
When there is no memory for the lens type, this function is ignored.
• MY IMAGE: Displays the MY IMAGE menu (
This item is to assign an input signals to MY
SOURCE button on the remote control ( SOURCE
Using the ▲/▼ buttons sets one of the input
signal.
Description
7 ).
COMPUTER IN1.
COMPUTER IN2.
BNC.
HDMI.
DVI-D.
S-VIDEO.
VIDEO 1.
VIDEO 2.
MY BUTTON is pushed.
46 ) appear or disappear.
OPTION menu
MY BUTTON
(Y, Cb/Pb, Cr/Pr).
55 ) or nothing.
29 ).
59 ).
MY
22 ).
55 ) or
33 ).
48 ).
49