Page 1
DUAL CHEST FREEZER MODEL: EF-D2418(WH) MODEL: EF-D4030(WH) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING IT. THIS APPLIANCE MUST BE INSTALLED ON A FLAT SURFACE. PLEASE ENSURE THE ELECTRICITY SUPPLY TO THIS APPLIANCE IS DISCONNECTED BEFORE INSTALLING. Please read this instruction carefully. It is advisable to keep this instruction manual in a safe place for future reference.
PRODUCT DESCRIPTION ENERGY SAVING TIPS 1. Do not place warm food into the appliance. Allow warm food to cool down first. 2. Do not install the appliance near cookers, radiators, or other sources of warmth. 3. High ambient temperature will cause the compressor to operate more frequent. 4.
1. This appliance is heavy. Care should be taken when moving it. 2. When you transport the appliance, the angle between the compartment body and the ground should not be less than 45º. WARNING: Never put the appliance upside down. 3.
Page 5
1. The thermostat control situated in the control panel regulates the temperature of the freezer compartment. Position “0 - 1” – OFF Position “1-4” – With stalls inside temperature is gradually lowered to transfer large Position “5” – To fast freeze and the compressor work continuously NOTE: Do not leave the appliance to run at position “5”...
CLEANING AND MAINTENANCE 1. Always ensure that the electrical main is turned off and unplug before cleaning the appliance. 2. Do not open the lid frequently and too long to save energy. Opened lid for prolonged period may cause the freezer unable to perform optimum cooling. 3.
Directly under sunlight or too close to Do not install the product under direct heat resources. sunlight. The air ventilation is not good. Keep certain space for ventilation. Model No : EF-D2418(WH) Gross Capacity : 244L Climatic Type Insulation Class : CLASS I Input Power...
Page 8
MAIN SPECIFICATION Failure Failure Reason Possible Solution The power is off. Turn on the power. Appliance does not cool The plug is not plugged in. Plug in and turn on the power. The fuse on the plug has broken. Change the fuse. Check the thermostat and regulate to The thermostat is set to minimum.
Need help?
Do you have a question about the EF-D2418 and is the answer not in the manual?
Questions and answers