Table of Contents
Advertisement
●
Input and Output Channels Last Edited Parameter Return Function
Once you have escaped out of parameter editing within the individual Input or Output channels
the DPA-260A will remember this last editing action on that Channel
next editing action pressing the EDIT button on that channel will immediately return you to the
screen related to this last editing action.
This function makes fine tuning or modifying easier when it is necessary to make a number of
adjustments to the same parameter in a short time sequence.
●
Input Channels and output Channels LINK Function
The DPA-260A is able to perform a unique LINK MODE between Input Channels as well as a link
between Output Channels to enable quick and immediate editing you cannot link output to input
channels).
To link channels when editing you will need to select a Master channel that will be the one to be
'
edited and have it s parameters displayed on the LCD screen You can then select and link other
(
)
channels Slaves that you wish to apply the same changes to
To enter a link mode session
pressing their related Edit buttons.
All Linked channels will be selected ready for adjustment when their Blue LED is lit in the Editing
mode.
Now all Slave channels and only those selected will modify their parameters accordingly as you
edit the Master channel.
All other existing parameters will stay the same within the Slave Channels unless edited by this
link with the Master channel.
Note: The LINK function is NOT a COPY function.
If we want to edit the limiter of the Output channels
1
Output Channel
by pressing the related Edit button and turning on the Blue LED below the
1
Output Channel
LED meters This assigns the
parameters on the LCD:
Then press the Edit button of Output Channels
parameters edited on Output Channel
If we want to remove one of the linked channels from the Link press the related Edit button
Exiting the editing of the Master channel during a Link session will automatically terminate that
.
session
The Link will also be automatically terminated if during the editing of Output Channels
you jump across to begin editing an Input channel or vice versa.
,
,
select the Master channel Edit mode
.
"
-1
Out
Name
:
5
: 0.2
A
ms
R
s
2/4,
1,
will also be applied to channels
30
.
When you return for your
(
"
"
.
.
,
then link the Slaves by
"
"
1/2/4,
we can enter the editing mode of
"
role
of Master and displays this channel s
Limiter
+5.0
dB
"
turning on their related Blue LED s Now all
2
and
,
,
'
"
' .
4.
.
Advertisement
Table of Contents
