Table of Contents
Advertisement
–
Input Routing:
the DPA-260A Processor is equipped with
)
XLR and a stereo S PDIF Digital Input RCA connector
"
The
Routing Options
By pressing ENTER on Input Routing and then rotating the
possible to select the Main Inputs for the DPA-260A allowing the User to choose between
/
Analog or S PDIF Digital
The selection can be confirmed by pressing the
The following screen shows that the Analog Input has been selected:
-
–
Power On Procedure
DPA-260A powers up after being switched on:
By pressing ENTER and rotating the PM
: "
two options
Fade In On
The currently running option will be displayed with an asterisk
description.
To change the option simply ENTER on the option not displaying the Asterisk and that option
will become active and an Asterisk will now appear to the right of the option description.
The following two options are available:
-
=
... when the DPA-260A is turned on all Outputs regard of their status before
FADE In
Off
the Unit was switched off will be MUTED or UNMUTED automatically meaning the DPA-260A
will have no active Outputs or active Outputs during the start up process depending from the
'
Outputs
previous status
-
=
... when the DPA-260A is turned on all Outputs not previously muted before
FADE In
On
the Unit was switched off will be active meaning the DPA-260A outputs will be controlled by a
volume ramp to avoid any sudden sound.
"
- =
If the option
Fade In On
/
(
"
page allows you to select the desired Input type
SYSTEM UTILITY
–
Input Routing
.
Input Routing
:
Source
Analog
: this gives you the ability to select the option that will apply when the
SYSTEM UTILITY
–
-
Power On Procedure
"
2" "
"
"
or
Fade In Off
,
.
,
"
,
is selected the screen will show the following
-
Power On Procedure
- :
Fade In
On
2
Analog Inputs Balanced Female
).
--
"
2"
PM
,
"
"
.
ENTER
button
*
--
3"
,
or PM
encoder it is possible to choose between
".
,
-
*
9
(
:
"
3"
,
or PM
encoders it is
to the right of the option
,
.
:
Advertisement
Table of Contents
