Polarity Page - Marani DPA-260A User Manual

Delay page – from this page it is possible to set the Output Channels Delay Time from
000.0000 848.9984
mS up to
To set the Delay time press ENTER an arrow will appear on the left of the screen " -> ". then use
" 2"
the PM encoder to set the Delay Time in steps of mS and the
20.8
Delay Time in steps of
The following is an example screen for the
1 160.1872 :
is set to mS
– from this page it is possible to set the Output Channels Polarity by using the

Polarity page

" 1" " 2"
PM or PM encoders
"
The polarity can be Normal
The following is an example of a
" "
Normal
, 1
mS by steps of mS or
.
microseconds
"
Delay
-1
Out Name
-> = 160.1872
Delay
.
" " " (
or Inverted which means rotated of
" "
Polarity screen where the Polarity of Output Channel
-1
Out Name
-> =
Polarity Normal
20.8 .
uS
1 "
PM
"
page where the Delay Time of Output Channel
Delay
mS
180
Polarity
29
3", "
for setting the fine
,
).
Degrees
1
is set to
"