McDATA Sphereon 4500 User Manual page 182

Product Manager Messages
A
S
McDATA® Sphereon™ 4500 Fabric Switch Product Manager User Manual
A-22
Message Resource is unavailable.
Description The specified operation cannot be performed because the product is
unavailable.
Action Verify that the EFC Server-to-product link is up. If the link is up, the
EFC Server may be busy. Try the operation again later.
Message
Send firmware failed.
Description Send firmware operation has failed.
Action Retry the operation. If the condition persists, contact support
personnel.
Message
SNMP trap address not defined.
Description An SNMP trap address must be defined if a community name is
defined.
Action Define an SNMP address.
Message
Stop diagnostics failed. The test is already running.
Description Diagnostics for the port was not running and the Stop was selected on
the Port Diagnostics dialog box. Diagnostics quit for the port for some
reason, but the Stop button remains enabled.
Action Verify port operation. Retry diagnostics for port and select Stop from
the dialog box. If problem persists, contact your service
representative.
Message
Stop diagnostics failed. The test was not running.
Description The action to stop diagnostics failed because the test was not running.
Action
Informational message.