Configure Ports Dialog Box - McDATA Sphereon 4500 User Manual

Fabric switch
Hide thumbs Also See for Sphereon 4500:
Table of Contents

Advertisement

Configuring the Switch
3
McDATA® Sphereon™ 4500 Fabric Switch Product Manager User Manual
3-12

Configure Ports Dialog Box

Figure 3-4
Ports are numbered from 0 through 23.
2. Click a Name field and type a name that reflects the end device
connected through the port. For example, use "XYZ Server,"
where XYZ is the brand name of the server.
3. Block or unblock operation for a port by clicking the check box in
the Blocked column. When a check mark displays, the port is
blocked.
4. Enable or disable LIN alerts for the port by clicking the check box
in the LIN Alerts column. When a check mark displays, LIN alerts
are enabled.
The factory default for LIN alerts is enabled.
5. Click the check box in the FAN column to enable Fabric Address
Notification for loop devices.
6. Select a port type by clicking in the Type field and selecting from
the list.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents