Usb Memory Devices Cannot Be Played Back - Denon RCD-M40 Owner's Manual

Contents Connections
o USB memory devices cannot be played back
Symptom
"NO DEVICE" is displayed.
0
0
0
0
0
Files on the USB memory
0
device are not displayed.
0
0
Files on a USB memory
0
device cannot be played.
0
0
Front panel Display
Playback
The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device.
USB memory devices of a mass storage class or those compatible with MTP are supported.
This unit does not support a connection through a USB hub. Connect the USB memory device directly to
the USB port.
The USB memory device must be formatted to FAT16 or FAT32.
Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.
When using a type of portable hard disc drive compatible with the USB connection that requires power
from an AC adapter, use the AC adapter that came with the drive.
Files of a type not supported by this unit are not displayed.
The maximum file configuration that can be displayed on this unit is 255 folders, with a maximum of 255
files in each folder.
When multiple partitions exist on the USB memory device, only files on the first partition are displayed.
Files are created in a format that is not supported by this unit. Check the formats supported by this unit.
You are attempting to play a file that is copyright protected. Files that are copyright protected cannot be
played on this unit.
An unsupported format was played back. Select a supported format.
Rear panel
Settings
Cause / Solution
68
Remote
Tips Appendix
Page
Index
20
－
－
－
－
46
－
－
46
－
72