1. Before You Start
Package Contents
Ÿ TEG-S16Dg/TEG-S24Dg
Ÿ Multi-Language Quick Installation Guide
Ÿ Power Cord (1.8m / 6ft)
If any of the above contents are missing, please contact your reseller.
Minimum Requirements
Ÿ Computer with network adapter installed
Ÿ Cat.5e or Cat.6 network cable
Ÿ The surface must support at least 1.5 kg for the switch
Ÿ The power outlet should be within 1.82 m (6 ft) of the switch
Ÿ Make sure that there is proper heat dissipation and adequate ventilation
around the Switch
Ÿ Do not place heavy objects on the switch
2. Hardware Installation
1. Connect the Power Cord to the TEG-S16Dg/TEG-S24Dg and then to a power
outlet.
2. Connect a Cat.5e or Cat.6 RJ-45 network cable from the computer to an
available Ethernet port on the TEG-S16Dg/TEG-S24Dg.
1