Hardware Installation - TRENDnet TEG-448WS Quick Installation Manual
Hide thumbs
Also See for TEG-448WS:
- User manual (103 pages) ,
- Quick installation manual (13 pages) ,
- Specifications (2 pages)
Advertisement
2. Hardware Installation
Note: After hardware installation is complete, use the Web-based Smart Utility
to configure the TEG-448WS. To access the Web-based Smart Utility, open
your web browser, and enter the default IP Address
default password "admin". Make sure your computer and the TEG-448WS are
configured to the same network segment.
1. Connect the Power Cord to the
rear of the TEG-448WS and
then to a power outlet.
2. Connect a CAT-5 network
cable from the computer to an
available Ethernet port of the
TEG-448WS.
http://192.168.0.1
2
English
and
Advertisement
