Table of Contents
Advertisement
Knowing your vehicle
Closing the hood
1. Before closing the hood, check the
following:
1
• All filler caps in engine compart-
ment must be correctly installed.
2
• Gloves, rags or any other com-
bustible
material
removed from the engine com-
3
partment.
2. Secure the support rod in its clip.
4
3. Lower the hood to about 12 inches
(30 cm) height and then let it drop
to properly lock in place.
5
Make sure the hood is properly
locked before driving.
6
CAUTION
7
• Before closing the hood, make
sure that all engine parts and
tools have been removed from
8
the engine area and that no
one's hands are near the hood
9
opening.
• Do not leave gloves, rags or
any other combustible materi-
al in the engine compartment.
Doing so may cause a heat-
induced fire.
3
84
FUEL FILLER LID
must
be
1. Stop the engine.
2. To open the fuel filler lid, pull the
release lever.
CAUTION
To avoid injury from sharp
edges, it is recommended that
protective gloves be worn if
there is a need to open the fuel
filler door manually.
1LDA2018
3. Pull the fuel filler lid out to open.
4. To remove the cap, turn the fuel
tank cap counter-clockwise.
5. Refuel as needed.
6. To install the cap, turn it clockwise
until it "clicks". This indicates that
the cap is securely tightened.
7. Close the fuel filler lid and push it
lightly and make sure that it is
securely closed.
1LDA2019
Advertisement
Table of Contents
