Table of Contents
Advertisement
• For maximum defrosting, set the
temperature control to the extreme
right/hot position and the fan speed
control to the highest speed.
• If warm air to the floor is desired
while defrosting or defogging, set
the mode to the floor- defrost posi-
tion.
• Before driving, clear all snow and
ice from the windshield, rear win-
dow, outside rear view mirrors, and
all side windows.
• Clear all snow and ice from the
hood and air inlet in the cowl grill to
improve heater and defroster effi-
ciency and to reduce the probabili-
ty of fogging up inside of the wind-
shield.
Defogging logic
To reduce the probability of fogging
up the inside of the windshield, the
air intake control is set to the outside
(fresh) air position automatically if
any of following occur:
• The ignition switch is off.
• The mode is selected to the OFF
position.
• The ignition switch is turned on
while the mode is selected to the
,
or
.
• The mode is selected to the
or
while the system is acti-
vated.
Press the air intake control button to
select the recirculated air position
while the ignition switch is on.
Driving your vehicle
,
1
2
3
4
5
6
7
8
9
4 59
Advertisement
Table of Contents
