Maintenance
ENGINE OIL AND OIL FILTER
1
2
3
4
Checking the engine oil level
5
1. Be sure the vehicle is on level
ground.
6
2. Start the engine and allow it to
reach normal operating tempera-
ture.
7
3. Turn the engine off and wait for a
few minutes (about 5 minutes) for
8
the oil to return to the oil pan.
4. Pull the dipstick out, wipe it clean,
and re-insert it fully.
9
5. Pull the dipstick out again and
check the level. The level should
be between F and L.
7
12
1LDN5004
If it is near or at L, add enough oil to
bring the level to F. Do not overfill.
Use only the specified engine oil.
(Refer to "Recommended Lubricants"
later in this section.)
Changing the engine oil and
filter
Change engine oil and filter accord-
ing to the Scheduled Maintenance at
the beginning of this section.
1LDN5003