Kenmore 795.7105 series Use & Care Manual page 92

PM Control by APM
If Advanced Power Management (APM) is installed on your
system, selecting Yes gives better power savings.
Video Off Method
Determines the manner in which the monitor is blanked.
V/H SYNC+Blank System turns off vertical and horizontal
DPMS Support
Blank Screen
Video Off After
As the system moves from lesser to greater power-saving modes,
select the mode in which you want the monitor to blank.
MODEM Use IRQ
Name the interrupt request (IRQ) line assigned to the modem (if
any) on your system. Activity of the selected IRQ always awakens
the system.
Doze Mode
After the selected period of system inactivity, the CPU clock
throttles to a small percentage of its duty cycle — between 10
percent and 25 percent for most chipsets. All other devices still
operate at full speed.
synchronization ports and writes blanks to
the video buffer.
Select this option if your monitor supports
the Display Power Management Signaling
(DPMS) standard of the Video Electronics
Standards Association (VESA). Use the
software supplied for your video subsystem
to select video power management values.
System only writes blanks to the video
buffer.
84