Using the timers
Using the sleep timer
MENU
(MENU/123)
You can use this function to automatically shut off the TV after a pre-set period of time. You can set
the timer in 30 minute increments, for up to 3 hours.
Turning on the TV using the on timer
MENU
(MENU/123)
On Timer
You can set
separate configurations:
set.
Setup
●
If you select Manual, you can highlight and select the specific days that you want
turn on the TV.
Time
●
Volume
●
Source
●
From the list, select a signal source for the TV to use when it turns on. If you want to play
content saved in a USB device or content from an HDMI or Component source, such as a DVD
player, Blue-ray player, or set-top box, connect the device to the TV before you start On Timer
setup. For On Timer to function, you must keep the device connected to the TV.
Antenna
●
Allows you to select a broadcast signal source,
Channel
●
Allows you to select a channel when
System
Time
System
Time
to make the TV turn on automatically at a specific time. You can set up to three
On Timer
1, 2, and 3.
Sleep Timer
Try Now
On Timer
Try Now
On Timer
is only available when
Air
or Cable, when
Source
is set to TV.
Clock
has already been
On Timer
Source
is set to TV.
to