AgfaPhoto DC-2030m User Manual page 38

AgfaPhoto DC-2030m
Using the Shutter Priority
In this mode, you can set a shutter speed to match the brightness. Faster shutter speeds
allow you to take a sharp picture of a moving subject while slower speeds create a trail
effect and allow you to shoot without a flash in dark areas.
1
Turn the power on, and set the
camera to the Shutter Priority
( page 13).
2
Adjust the shutter speed by
pressing
3
Press shutter button to take a
picture.
Using the Manual Exposure
You can manually set the shutter speed and aperture to achieve a particular effect.
1
Turn the power on, and set the
camera to the Manual Exposure
( page 14).
2
2
Use the SET button to switch
between aperture value and
shutter speed control. Press
or to adjust the setting.
3
Press shutter button to take a
picture.
Press the shutter button halfway,
the difference between the
standard exposure and the
selected exposure appears in
red.
or button.
33