Table of Contents
Advertisement
AgfaPhoto DC-2030m
Inserting the Batteries
1
Open the battery cover.
Slide the battery cover in the
direction indicated by the
arrow.
2
Insert the batteries.
Insert two AA-size batteries
with the positive (+) and
negative (-) poles matching
the directions indicated
inside the battery room.
3
Close the battery cover.
Low Battery Indicator
A low battery indicator
exhausted. Batteries should be replaced promptly when the low battery indicator
appears.
About Battery Type
After replacing the batteries, please check the Battery Type in the setup menu (
page 20).
C
C
a
a
u
u
t
t
i
i
o
o
n
n
Risk of explosion if battery is replaced by an incorrect type dispose of used batteries
according to the instructions.
Be sure to turn off the camera power before insert or remove batteries.
It is recommended to use the provided battery. For other compatible batteries, please
refer to Battery types. (
Replace all batteries at the same time. Never mix old and new batteries.
Remove batteries if you will not be using them for a long time.
The camera body may feel warm after extended use. This is normal.
The type of battery and the battery power level may cause the lens to be stuck up.
Ensure you use the correct battery type and use a fully charged battery.
appears on the LCD screen when the batteries are nearly
page 20). Use of any other type battery is not recommended.
5
Advertisement
Chapters
Table of Contents
