AgfaPhoto DC-2030m User Manual page 36

AgfaPhoto DC-2030m
T i p s
T i p s
Distances referred to measure the distance between the camera lens surface
and the subject.
The available macro settings are limited depending on the REC mode you
selected.
Using the Self-timer & Burst
Use the self-timer to set a delay from the time the shutter button is pressed to the time
the image is shot. Use the burst to record continuous still images shooting.
1
Turn the power on, and set the
camera to the REC mode
( page 13).
2
Open the REC menu (
Use
mode] from the REC menu.
3
Change the setting.
Press
mode, then press the SET
button.
Off:
Record a single image.
2 sec.:
The shutter release will be delay for 2 seconds.
10 sec.:
The shutter release will be delay for 10 seconds.
Double:
Record two images in a shot after pressing the shutter release button 10
and 12 seconds.
Burst:
page 16).
or to select [Drive
or to select a drive
31