Kodak EasyShare 3 Series User's guide Manual page 8

Trou bleshooti ng conthued
AC adapter or USB cable is not Check the connections.
securely connected.
Too many applications running Close all software applications
on computec and try again.
Camera was removed from the
dock during picture transfec
button.
Press the Transfer button.
Unplug A/V cable.
Transfer button was not
pressed.
Cannot view camera LCD
screen when the docked
camera is turned on.
Red light (blinking)
Battery is not properly loaded.
Reload battery.
Load a new bafte%
Computer off.
AC adapter not connected.
No charging lights
Rechargeable battery not
loaded.
No transfer JJght
USB cable not connected.
Poor battery life
Dirt on battery contacts.
Battery is exhausted.
Camera and baftely have been Slowly return to room
exposed to extreme temperature.
temperatures.
No Jights
Camera not properly seated. Fully dose the camera's access
doors and covers. Replace
camera on dock.
Turn on computer.
Check power connection.
Load a Kodak rechargeable
battery.
Check USB connection.
Wipe the contacts with a clean,
Jry cloth.
Refresh Ni-MH battery.