Table of Contents
Advertisement
Available languages
Available languages
qB>
Specifications and notes
Specifications:
Communication with
USB (cable included with
computer/printer:
Kodak EasyShare camera
dock, series 3)
DC Voltaqe Input:
5 V DC at 2.0 Amps
AC Voltage:
110 V to 240 V 50/60
Hz
Notes:
* When the camera is on the dock it is
powered by the dock instead of the camera
batteries.
• Battery check (1 green charging light) may
take up to 10 minutes. See page 3.
• Your AC adapter may have additional plugs.
Use the one appropriate for your locality.
• Dispose of batteries according to local and
national regulations.
Troubleshooting
Cannot transfer
pictures to
the computer
Software is not installed or is
installed incorrectly.
(WindowsOS-basedonly)
DisconnectUSBcable and
remove
cdm@l-8
from
dock,
Camera was docked and
listed as an unknown device
(Windows OS-based only).
software.
To uninstall,
go to
Sta4 > Settings
> Control
Panel > Add/Remove
Programs.
Disconnect
USB cable
and
remove
camera
frorn dock.
Delete
camera
from
Device
Manager:
Right-click
on My
Computer,
go to Properties
>
Hardware
> Device
Manager
>
Other
Devices.
Advertisement
Table of Contents
