ECS P67H2-A Manual page 41

Power Management Setup
This page sets up some parameters for system power management operation.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset M.I.B X
Power Management Setup
Resume by Ring
Resume By PCI/PCI-E/Lan PME
Resume by USB (S3)
Resume by PS2 KB (S3)
Resume by PS2 MS (S3)
EUP Function
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Resume by Ring (Disabled)
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call
on the modem) awakens the system from a soft off state.
Resume By PCI/PCI-E/Lan PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI LAN card. You must use an ATX power supply in order to use this feature. Use
this item to do wake-up action if inserting the PCI card.
Resume By USB (S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
Resume By PS2 KB (S3) (Disabled)
This item enables or disables you to allow keyboard activity to awaken the system
from power saving mode.
Resume By PS2 MS (S3) (Disabled)
This item enables or disables you to allow mouse activity to awaken the system from
power saving mode.
EUP Support (Disabled)
This item allows user to enable or disable EUP support.
Press <Esc> to return to the Advanced Menu page.
Boot Security Save & Exit
About Resume by Ring
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
:Select Item
[Disabled]
Enter : Select
+/- : Value
F1:General Help
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Using BIOS
33
:Select Screen