Download Print this page

Pace Denali HD Specification Manual page 2

Advertisement

RNG150N Denali
Technical Specifications
RF Interfaces
2 x In-band, 54 MHz-1 GHz Video Tuner (with QAM 64/256 decoding)
1 x In-band, 54 MHz-1 GHz DOCSIS® Tuner
1 x OOB, 70-130 MHz Agile Tuner with QPSK decoding
(including support for 104.2 MHz)
1 x RF Return, 5-42 MHz,QAM,QPSK Modulator
(compliant with Starvue II/DVS178/SCTE 55-1)
DOCSIS Cable Modem
DOCSIS 2.0 Cable Modem
Advanced DSG Support
Audio/Video Output
MPEG-2 MP@ML and MP@HL ATSC A/54 decode up to 1080p30
MPEG-4 MP@ML and MP@HL ATSC A/54 decode up to 1080p30
HDMI™ 1.3a Audio/Video Out with HDCP copy protection
Component (Y Pb Pr), Composite Video RCA outputs
Native 480i, 480p, 720p, 1080i and 1080p30 scaling modes
Simultaneous HD output via HDMI and Y Pb Pr outputs with HD video downscaled
to SD on CVBS output
Independent scaling of video/graphics on HD and SD outputs
Support for Zoom, Stretch and Crop
Constrained image support if CCI flag set on Component video outputs and HDMI
if HDCP not in effect
Macrovision copy protection capability v7.1 inc. support for Component
video output
5.1 Dolby Digital optical and coaxial output
AC-3 Matrix surround down mix to Stereo L/R RCA outputs
Ch 3/4 modulated RF output
Front Panel
LED clock/channel display
LED indicators for Message, Bypass, HDTV, Power, IR, Record, Play
®
For more information on Pace products, please visit our website - www.pace.com/americas
Pace Americas, 3701 FAU Blvd, Suite 200, Boca Raton, FL 33431
Tel: 561-995-6000 Fax: 561-995-6001
Pace and
are trade marks and/or registered trade marks of Pace plc.
System Processor/Memory
1500 Dhrystone MIPS processor for system and application use
64 MB Flash memory
512 MB SDRAM (Unified MPEG Decode/Graphics system run from RAM)
as standard
512 KB Non-volatile managed storage area within Flash
with random bit wise access
500 GB Hard Drive as standard on "Dallas" models, upgrade option
on "Denali" models
Support for external HDD via eSATA as standard
Conditional Access
Multistream CableCARD (M-Card) and Embedded MediaCipher
of "Dallas" and "Denali" models available
CableCARD located behind flush mount cover
Pace Software
Pace EngineWare
Set-Up and Diagnostics
Diagnostic screens and Dashboard for on-site installation and debug
SNMP support for remote diagnostics
Display configuration menu
Software Update Mechanism
OOB Software Download Mechanism
Accessories
Consumer Quick Start Guide
External Power Supply
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
software v3.0 and STT driver code
TM
Model
Model Number(s)
"Dallas"
RNG200N
HD DVR with CableCARD
TM
"Denali"
RNG150N
HD eSATA with CableCARD
TM
"Dallas"
RNG200N
HD DVR with Embedded Security
"Denali"
RNG150N
HD eSATA with Embedded Security
This specification is subject to change without notice
security versions
TM
Pace Part No(s)
C0203339900
C0193340000
B9503339100
B7023439000
RNG150N-0513-5

Advertisement

loading

This manual is also suitable for:

Dallas specification