Table of Contents
Advertisement
Flashing keypad
Use this menu to select whether the keypad back
lighting should fl ash in the event of incoming calls.
1. During standby mode, press M1 to enter the main
menu.
2. Use
confi rm.
3. Use
4. Use
confi rm.
5. Use
Navigation buttons
You can assign various menu options to the digit keys
2 to 9. Then hold the corresponding key pressed longer
than 3 seconds to open the respective menu.
1. During standby mode, press M1 to enter the main
menu.
2. Use
confi rm.
3. Use
confi rm.
4. Use
/
to select Phone Setting, press M1 to
/
to select Call Setting, press M1 to confi rm.
/
to select Key LED fl ash, press M1 to
/
to select On or Off, press M1 to confi rm.
/
to select Phone Setting, press M1 to
/
to select Set Fast key 2−9, press M1 to
/
to select 4−key, press M1 to confi rm.
Settings
65
Advertisement
Table of Contents
