Advertisement

Quick Links

Keep this user guide for future reference.
PIX2000 User Guide.indd
PIX2000 User Guide.indd
3
3
PIX2000

User Guide

2009-6-30
2009-6-30
17:33:29
17:33:29

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PIX2000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Oricom PIX2000

  • Page 1: User Guide

    PIX2000 User Guide Keep this user guide for future reference. PIX2000 User Guide.indd PIX2000 User Guide.indd 2009-6-30 2009-6-30 17:33:29 17:33:29...
  • Page 2 PIX2000 User Guide.indd PIX2000 User Guide.indd 章节1:2 章节1:2 2009-6-30 2009-6-30 17:33:30 17:33:30...
  • Page 3: Table Of Contents

    Caller ID Service ..............19 Phone Book .................22 Menu Operation ..............24 Operation and setup of the picture frame ......32 Operation during an incoming call ........53 Troubleshooting ..............59 Warranty Information ............62 PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:1 章节2:1 2009-6-30 2009-6-30 17:33:30...
  • Page 4: Safety Information And Warnings

    20mW limit at which point testing is required. • The earpiece of the handset may attract small metal objects such as staples and pins. Care should be taken when placing the handset near these items. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:2 章节2:2...
  • Page 5 Model no. KSS12_060_1500S Input 100-240V~, 50/60Hz, 0.35A Output: 6V 1500mA For Base adaptor Model No.: KG35-6-250D Manufacturer: Kings Input: 240V AC / 50 Hz Output: 6 V DC, 250mA PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:3 章节2:3 2009-6-30 2009-6-30 17:33:30 17:33:30...
  • Page 6 DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS THERE IS A RISK OF EXPLOSION AND/OR WARNING INJURY. USE ONLY NI-MH RECHARGEABLE BATTERIES AS SPECIFIED IN THIS USER GUIDE. CONTACT ORICOM FOR REPLACEMENT BATTERIES. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
  • Page 7: Getting Started

    PIX2000 base to ensure that your broadband and PIX2000 will work properly. If you do not install the fi lter you will experience interference on the PIX2000 and your Broadband may suffer dropouts. Please refer to the user guide of the in line fi lter for installation.
  • Page 8 Installation of the Photo Frame 1. Insert the supplied power adaptor into the socket on the bottom of the Photo Frame. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:6 章节2:6...
  • Page 9: Handset And Base Layouts

    Mute / Cancel / Ring off key Recall key Phone book key Talk on / Off key Asterisk / Intercom key Hash / Keypad lock key Speaker Key Paging key PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:7 章节2:7 2009-6-30 2009-6-30 17:33:31 17:33:31...
  • Page 10: Lcd Display

    No ring icon Microphone mute icon Intercom call indicator Battery level indicator Phonebook icon Menu icon Voice mail waiting indicator (VMWI icon) Caller ID icon Alarm icon Speaker icon PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:8 章节2:8 2009-6-30 2009-6-30 17:33:31 17:33:31...
  • Page 11: Photo Frame And Remote Control Layouts

    Photo frame and remote control Layouts Photo frame and remote control Layouts Bottom Panel: Power inlet Front Panel: IR window PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:9 章节2:9 2009-6-30 2009-6-30 17:33:31 17:33:31...
  • Page 12: Back Panel

    1. USB port is only for connection with USB drive. Connection to PC will damage the unit. 2. Performance is not guaranteed when connected with other USB devices like Cell phones, MP3 player. Top Panel: PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:10 章节2:10 2009-6-30...
  • Page 13 Return to Menu Selection Screen Stop / Return Ok / Pause Shortcut key for immediate photo playback Mute Phone off Phone on or Recall Remote control Key Descriptions: PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:11 章节2:11 2009-6-30 2009-6-30 17:33:31 17:33:31...
  • Page 14 Previous picture during photo playback / previous page Return to Menu Selection Screen Stop / Return Ok / Pause Shortcut key for immediate photo playback Mute the MIC Phone off Phone on PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:12 章节2:12 2009-6-30 2009-6-30 17:33:32 17:33:32...
  • Page 15: Operation And Setup Of The Cordless Handset

    1. Press the key to answer a call. 2. After finishing the conversation, press key or place the cordless handset into the charger. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:13 章节2:13 2009-6-30 2009-6-30...
  • Page 16: Auto Answer

    3. Press key in the called handset to answer. Call Transfer The function allows you to transfer an external call from a handset to another handset. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:14 章节2:14 2009-6-30 2009-6-30...
  • Page 17 2. Press [ 2 ] to put the current call on hold and talk with the second caller. 3. Repeat steps 1-2 to swap between the two callers. Three-way Conference call You may have a 3-way conference call using the intercom and an open line. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:15 章节2:15 2009-6-30 2009-6-30...
  • Page 18: Muting The Microphone

    Short press any key on the handset or press page key briefl y on the base. Switching the Key Lock On/Off Press and hold key to activate or deactivate the key lock. The icon turns on or off. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:16 章节2:16 2009-6-30 2009-6-30 17:33:32...
  • Page 19: Redial Function

    3. Press key to enter menu, press key to select “DELETE?”, press key, “CONFIRM?” will be shown. 4. Press key to confi rm. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:17 章节2:17 2009-6-30 2009-6-30 17:33:33 17:33:33...
  • Page 20: Delete All Redial Records

    “CONFIRM?” will be shown. 4. Press key to confi rm. Note: During redial function operating, if you want to return to the upper layer menu, press key. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:18 章节2:18 2009-6-30 2009-6-30 17:33:33 17:33:33...
  • Page 21: Caller Id Service

    2. Press key to review all call records. 3. When you scroll to the end, “--(GO BACK)--” will be shown. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:19 章节2:19 2009-6-30 2009-6-30...
  • Page 22 The selected number will be shown, press key, “ENTER NAME” will be shown and input the desired name. You must input the name, otherwise the record can’t be saved. 5. Press key to save. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:20 章节2:20 2009-6-30 2009-6-30...
  • Page 23 3. Press key to enter menu. 4. Press key to select “DELETE ALL?”, press key, “CONFIRM?” will be shown. 5. Press key to confi rm. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:21 章节2:21 2009-6-30 2009-6-30 17:33:33 17:33:33...
  • Page 24: Phone Book

    Press key to access phone book memory. 1. Press key to scroll. 2. Press key to select a desired entry, and then press to select the submenu “EDIT”. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:22 章节2:22 2009-6-30 2009-6-30 17:33:33 17:33:33...
  • Page 25: Delete Entries

    “DELETE ALL?”. 3. Press key to delete the entry. 4. Press key again to confi rm. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:23 章节2:23 2009-6-30 2009-6-30 17:33:33...
  • Page 26: Menu Operation

    You may set the warning beep to “ON” when your cordless handset battery is low, to alert you to charge the battery. 1. Press key. 2. Press key to select “SETUP HS” and press key. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:24 章节2:24 2009-6-30 2009-6-30 17:33:33...
  • Page 27 1. Press key. 2. Press key to select “SETUP HS” and press key. 3. Press key to select “AUTO TALK” and press key. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:25 章节2:25 2009-6-30 2009-6-30 17:33:34 17:33:34...
  • Page 28 “SETUP HS” and press key. 3. Press key to select “LANGUAGE” and press key. 4. Press key to select Language. 5. Press key to confi rm the setting. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:26 章节2:26 2009-6-30 2009-6-30 17:33:34 17:33:34...
  • Page 29 2. “Wrong PIN” will be shown if the old PIN code you input is wrong, and then return to step 4. 3. If the new PIN code that you input two times is different, the change will fail, the display will return to step 5. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:27 章节2:27...
  • Page 30 If you have subscribed to a voice messaging service, the icon will display on the handset to alert you if you have a messages waiting. To turn Visual Message Waiting Indication (VMWI) off PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:28 章节2:28...
  • Page 31 01-30/31, month range: 01-12), press key to confirm the setting and enter time setting. 5. Input the correct time, the format is: hour/minute (hour range: 00-23, minute range: 00-59). 6. Press key to confi rm the setting. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:29 章节2:29 2009-6-30 2009-6-30...
  • Page 32 Registration Register new handsets on the pix2000 base The handset which comes with this pack is already registered to the base. If you buy new handsets. You need to register them before use.
  • Page 33 1. The removed handset LCD will show “SEARCHING”. You must register it again before using it. 2. If the PIN code you input is wrong, “WRONG PIN” will be shown on cordless handset LCD. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:31 章节2:31...
  • Page 34: Operation And Setup Of The Picture Frame

    When the Photo Frame is linked to the base the screen will show the following: Note: The number “1” indicates the handset number. It can be 1 to 6. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:32 章节2:32 2009-6-30...
  • Page 35 Operation and setup of the picture frame When the Photo Frame is out of range the following will be displayed: When the Photo Frame is not registered the display will show the following: PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:33 章节2:33...
  • Page 36 : Stop to play the picture. Note: The fi le folder structure should not exceed: 6 levels of folders or 150 folders or 1300 files. Otherwise an external memory reading error may occur. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:34 章节2:34 2009-6-30...
  • Page 37 • Display: Display the current calendar. • Set Date: Set the current date using the navigation keys • Exit: Exit Calendar Application. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:35 章节2:35...
  • Page 38 Show time and set Select [Clock] icon using the navigator key in the main menu and press on the photo frame or on the remote control to proceed, the LCD screen will show below: PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:36 章节2:36...
  • Page 39 There are three options: • Display • Set Time • Exit Display: • Clock: Display clock only as shown below: • Clock & Calendar: Display clock with calendar: PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:37 章节2:37 2009-6-30 2009-6-30 17:33:36 17:33:36...
  • Page 40: Alarm Menu

    • Set Time • Exit Enable: • On: Enable alarm function • Off: Disable alarm function Set time: You can set the alarm time using the navigation keys: PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:38 章节2:38 2009-6-30 2009-6-30 17:33:36 17:33:36...
  • Page 41 User can press any key to exit the alarm mode and end the alarm tone or it will turn off automatically after 5 minutes of continuous alert. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:39 章节2:39...
  • Page 42: Setup Menu

    : Custom setup : Exit Using the navigator key, select and press on the photo frame or on the remote control, you will be able to setup the following functions. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:40 章节2:40 2009-6-30 2009-6-30...
  • Page 43: Menu Structure

    - Block 9 - Fade In Fade Out - Random - Fit Screen Show Type - Full Screen - Thumbnail Browse - File Manager Auto-Play - ON Photo - OFF PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:41 章节2:41 2009-6-30 2009-6-30 17:33:36 17:33:36...
  • Page 44 • Browse: The display format for managing photos. There are 2 selections: fi le manager or thumbnail. - File Manager Mode: If you set the browse method to fi le manager, PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:42 章节2:42...
  • Page 45 Rotate photos during thumbnail mode: Step1: Select [Rotate] icon using the navigator key and press on the photo frame or on the remote control to proceed. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:43 章节2:43 2009-6-30...
  • Page 46: Phonebook Menu

    Select [Phonebook] icon using the navigator key in the main menu and press on the photo frame or on the remote control to proceed. Note: Only JPEG fi les can be added into the phonebook. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:44 章节2:44 2009-6-30...
  • Page 47 • Exit: return to main menu Phonebook Review Menu Select [Review] using the navigator key and press on the photo frame or on the remote control to proceed, the LCD screen will show below: PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:45 章节2:45 2009-6-30...
  • Page 48 Step3: Select [OK] using the navigator key and press on the photo frame or on the remote control to confi rm. Delete All records Step1: Select one entry during phonebook review screen and press PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:46 章节2:46 2009-6-30...
  • Page 49: Call Log Menu

    The photo frame can store up to 30 call logs. Select [Call Log] icon using the navigator key in the main menu and press on the photo frame or on the remote control to proceed. The following screen will be shown. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:47 章节2:47...
  • Page 50 The photo frame can’t save the logs for calls without CID. If you select [All Calls] or [Missed calls], [Received calls] and press on the photo frame or on the remote control, the LCD screen will show below. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:48 章节2:48...
  • Page 51 Step3: Select [OK] using the navigator key and press on the photo frame or on the remote control to confi rm. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:49 章节2:49 2009-6-30...
  • Page 52: Phone Setup Menu

    There are fi ve options; • Registration: link with cordless system • Ringer Pattern: select ringer pattern • Ringer Loudness: select current loudness • Show Miss Call: • Exit: Return to main menu. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:50 章节2:50 2009-6-30 2009-6-30...
  • Page 53: Ringer Pattern

    Step2: Select desired ring pattern using the navigator key and press on the photo frame or on the remote control to confi rm. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:51 章节2:51...
  • Page 54 Step2: Select “On” or “Off” by navigator key and press on the photo frame or on the remote control to confi rm. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:52 章节2:52...
  • Page 55: Operation During An Incoming Call

    Case 1: Incomming call where the number matches with a phonebook entry, the displayed name will be in the phonebook instead of just the number. The LCD screen will show below. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:53 章节2:53...
  • Page 56 Case 2: Incomming call which the number does not match with the phonebook, the unknown picture and the number will be shown Case 3: If the caller ID name is absent or somehow unavailable, the LCD will show below. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:54 章节2:54...
  • Page 57 Operation during an incoming call Case 4: If there is an external call without caller ID, the LCD will show below. Case 5: If there is an internal call, the LCD will show below. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:55 章节2:55...
  • Page 58 MIC, the LCD screen will show as below: If there is an external call without CID or an internal call, after answering the call, the LCD screen will show below. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:56 章节2:56...
  • Page 59: Call Waiting

    2. You can press on the photo frame or on the remote control swap caller1 and caller2. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:57 章节2:57 2009-6-30...
  • Page 60 If You set “Show Miss Call” to “Off”, when there are missed calls, the Missed call screen will not be shown, and the digital photo frame will continue the previous state. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:58 章节2:58...
  • Page 61: Troubleshooting

    3. RE-INSERT batteries and remains empty. 3. Battery installed incorrectly. check + and . 4. The product is not properly 4. Check power connected. CONNECTION to the base. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:59 章节2:59 2009-6-30 2009-6-30 17:33:39 17:33:39...
  • Page 62 1. Other handset may still be 1. Check ALL handsets and use light on. connected. END all calls. 2. Check power supply 2. Check CONNECTIONS to connection. wall and base. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:60 章节2:60 2009-6-30 2009-6-30 17:33:39 17:33:39...
  • Page 63 Cannot make/ 2nd call service can be Check with your service answer a 2nd activated. provider. Check the recall call selection is correct. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:61 章节2:61 2009-6-30 2009-6-30 17:33:40 17:33:40...
  • Page 64: Warranty Information

    Customer Support Service on 1300 880 785. (b) Exclusion and limitation of liability. Oricom will not be in breach of a warranty or condition expressly stated in this User Guide or the Warranty Card or implied by the Trade Practices...
  • Page 65 This equipment shall not be set to make automatic calls to the Telecom “111” Emergency Service. This equipment may not provide for the effective hand-over of a call to another device connected to the same line. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:63 章节2:63...
  • Page 66 Some of the CID services listed may not be available in New Zealand. This telephone is not designed for making emergency telephone calls when the power fails. Make alternative arrangements for access to emergency services. PIX2000 User Guide.indd PIX2000 User Guide.indd 章节2:64 章节2:64 2009-6-30...
  • Page 67: Customer Support

    Australia Oricom International Pty Ltd Locked Bag 658 South Windsor, NSW 2756 Customer Support Email: support@oricom.com.au Web: Australia www.oricom.com.au New Zealand www.oricom.co.nz Phone: (02) 4574 8888 Fax: (02) 4574 8898 PIX2000 User Guide.indd PIX2000 User Guide.indd 2009-6-30 2009-6-30 17:33:26 17:33:26...

Table of Contents