Table of Contents
Advertisement
The TMS function lets you skip to
the beginning of a song or other
passage. The tape skips forward or
backward, depending on which
direction you push the FF/REW/
TMS switch.
Activate TMS by pushing the FF/
REW/TMS button and holding it
until you hear a beep. If you push
the button down, you will see REW
blinking in the display as the tape
rewinds. If you push the button up,
you will see FF blinking in the
display as the tape fast forwards.
When the system senses a silent
period on the tape, it goes back to
PLAY mode.
FF/REW/TMS
SWITCH
The REPEAT and TMS functions
use silent periods on the tape to
find the end of a selection. These
features may not work satisfacto-
rily on tapes that have almost no
gap between songs, a high noise
level between songs, or silent peri-
ods in the middle of songs.
Audio System (Except S)
REPEAT
BUTTON
Caring For Cassettes
Damaged cassettes can jam inside
the drive or cause other problems.
See page
94
for information on
cassette care and protection.
Comfort and Convenience Features
Advertisement
Chapters
Table of Contents
