Honda Prelude 2003 Owner's Manual page 161

3. Turn the lock ring counterclock-
wise (about one-quarter turn) to
unlock the headlight bulb.
4. Remove the bulb by pulling it
straight out of its recess.
5. Install the new bulb with the
electrical connector pointing
down. Make sure all three tabs
on the bulb are seated in their
slots in the headlight.
6. Turn the lock ring clockwise to
lock the bulb in place. Do not
force the ring. Check the seating
of the bulb's tabs if the ring will
not return to its original position.
7. Reinstall the harness connector
on the bulb connector. Make sure
it locks in place.
Turn on the headlights to test
the new bulb.
8. (Passenger's side)
Reinstall the radiator reserve
tank.
Replacing a Parking Light
Bulb
1. Use a Phillips-head screwdriver
to remove the screw from the top
of the fender.
SCREW
2. Move the parking light assembly
forward until it slides out of the
body.
3. Turn the socket one-quarter turn
counterclockwise to remove it
from the lens.
Lights
CONTINUED
Maintenance