Chrysler 2013 200 Convertible Owner's Manual page 164

162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
Commands
The Voice Command system understands two types of
commands. Universal commands are available at all
times. Local commands are available if the supported
radio mode is active.
Changing the Volume
1. Start a dialogue by pressing the Voice Command
button.
2. Say a command (e.g., "Help").
3. Use the ON/OFF VOLUME rotary knob to adjust the
volume to a comfortable level while the Voice Com-
mand system is speaking. Please note the volume
setting for Voice Command is different than the audio
system.
Main Menu
Start a dialogue by pressing the Voice Command
button. You may say "Main Menu" to switch to the
main menu.
In this mode, you can say the following commands:
• "Radio" (to switch to the radio mode)
• "Disc" (to switch to the disc mode)
• "Memo" (to switch to the memo recorder)
• "Setup" (to switch to system setup)
Radio AM
To switch to the AM band, say "AM" or "Radio AM". In
this mode, you may say the following commands:
• "Frequency #" (to change the frequency)
• "Next Station" (to select the next station)
• "Previous Station" (to select the previous station)