Clint L1 User Manual page 11

3.2.1 Selecting stations
The first time you select FM radio, L1 is set to the lowest frequency in
the FM band.
To scan for a station in FM mode
Press Select knob. L1 scans up through the FM band frequencies, showing
the current frequency on the screen display.
A scan stops when a signal is found. L1 can be set to stop at each station
or only at stations with a strong signal.
Alternatively, you can tune, using the left/right knob on the front panel,
in 50 kHz steps.
www.clintdigital.com
11