Mazda MX-5 Owner's Manual page 217

MX-5_8V80-EA-06F_Edition1 Page216
Monday, June 12 2006 12:57 AM
Interior Comfort
Climate Control System
CAUTION
When using the air conditioner while
driving up long hills or in heavy traffic,
closely monitor the temperature gauge
(page 5-35).
The air conditioner may cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner off
(page 7-19).
NOTE
When maximum cooling is desired,
l
set the temperature control dial to the
extreme cold position and set the air
intake selector to the recirculated air
mode, then turn the fan control dial
fully clockwise.
If warmer air is desired at floor level,
l
set the mode selector dial at the
or position and adjust the
temperature control dial to maintain
maximum comfort.
The air to the floor is warmer than
l
air to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
qVentilation
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the outside
air mode.
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
6-8
Form No.8V80-EA-06F
qWindshield Defrosting and Defogging
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
desired position.
3. Set the fan control dial to the desired
speed.
Do not defog the windshield using the
position with the temperature
control set to the cold position:
Using the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog up.
Your vision will be hampered, which
could lead to a serious accident. Set
the temperature control to the hot or
warm position when using the
position.
or
Black plate (216,1)
WARNING
position with the