Setting Change (Function Customization) - Mazda MX-5 Owner's Manual

MX-5_8V80-EA-06F_Edition1 Page78
Monday, June 12 2006 12:56 AM
Knowing Your Mazda
Advanced Keyless Entry and Start System

Setting Change (Function Customization)

The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.
Setting
Advanced key battery dead KEY indicator light (green) flashes to indicate
indicator that the advanced key battery power is low.
Lock/unlock operation A beep sound is heard to confirm that both doors
*1
confirmation beep sound or the trunk lid have been locked/unlocked.
When both doors are closed and the advanced key
is being carried and out of operational range, both
doors automatically lock after 3 seconds.
Autolock function
(Even if the driver is in the operational range,
both doors are locked automatically after about 30
seconds.)
*1 : When the autolock function is operating, the warning sound will be heard regardless of the setting.
3-20
Form No.8V80-EA-06F
Function
Black plate (78,1)
At Initial After Setting
Setting Change
Activated Deactivated
Activated Deactivated
Deactivated Activated