Turn Signal Control; Diff-Marked Review Copy; Old=2005 B-Series Fus Owners Guide (Post-2002-Fmt) 2Nd Printing (#24721) (Nov-24-2004 11:18:53; New=2006 B-Series Fus Owners Guide (Post-2002-Fmt) 2006 Mbs Cne (#Noentry) (Apr-12-2005 14:48:18 - Mazda 4WD Owner's Manual

JOBNAME: No Job Name PAGE: 39 SESS: 1 OUTPUT: Tue Apr 12 14:52:56 2005
/ford_pdm/ford/own2002/mbs/mpdiff
5. Locate the vertical adjuster for
each headlamp. Adjust the aim
by using a 4 mm wrench to turn
the adjuster control either
clockwise (to adjust down) or
counterclockwise (to adjust up).
6. In addition to the horizontal line
marked in step 2, a pair of
vertical lines (5) must be
marked at the center line of the
headlamps on the wall or
screen.
7. On the wall or screen, locate the high intensity area of the beam
pattern. The left edge of the high intensity area should be even with
the vertical line corresponding to the headlamp under adjustment. If
the left edge of the high intensity area is not even with the vertical
line, follow the next step to adjust it.
8. Locate the horizontal adjuster
for each headlamp. Use a 4 mm
wrench, turning it clockwise or
counterclockwise, to place the
left edge of the high intensity
area even with the vertical line
corresponding to the headlamp
under adjustment.

TURN SIGNAL CONTROL

Push down to activate the left
turn signal.
Push up to activate the right turn
signal.
PAGE: 39 OP: root EDIT SESSION: 1 DATE: APR 12 2005 at 14:52 JOB: @ibm2/ford_pdm/CLS_ford/GRP_own2002/JOB_mbs/DIV_mpdiff
DIFF-MARKED Review Copy ——

(OLD=2005 B-Series fus Owners Guide (post-2002-fmt) 2nd Printing (#24721) (Nov-24-2004 11:18:53))

(NEW=2006 B-Series fus Owners Guide (post-2002-fmt) 2006 MBS CNE (#NoEntry) (Apr-12-2005 14:48:18))

2006 B-Series (mbs), Owners Guide (post-2002-fmt) (own2002), Market: USA (fus)

Lights
art=mbscf406_a
art=mbscf407_a
CIMS #54764
com_turn_indicator
itdseq=43
art=rancf324_a
39