Mazda 2007 Mazda6 Sports Sedan Owner's Manual page 314

Mazda6_8W54-EA-06G_Edition1 Page313
Tuesday, July 25 2006 1:54 PM
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order
of removal.
Overhead light/Map lights (Without
overhead console)
1. Wrap a flathead screwdriver with a soft
cloth to prevent damage to the trim and
gently insert it in the overhead light as
shown in the figure, and then remove
the overhead light unit.
2. Turn the socket and bulb assembly
counterclockwise and remove it.
Form No.8W54-EA-06G
Black plate (313,1)
Maintenance and Care
Owner Maintenance
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse order
of removal.
Courtesy lights, Vanity mirror lights,
and Luggage compartment light
1. Wrap a small flathead screwdriver with
a soft cloth to prevent damage to the
lens and remove the lens by carefully
prying on the edge of the lens.
2. Disconnect the bulb by pulling it out.
Courtesy lights
Edge
8-47