To Release The Seat Belt; Pre-Tensioner Seat Belt - Hyundai Genesis 2009 Owner's Manual

Safety features of your vehicle
When using the rear center seat belt, the
buckle with the "CENTER" mark must be
used.
3 18
OBH038023N

To release the seat belt:

The seat belt is released by pressing the
release button (1) in the locking buckle.
When it is released, the belt should auto-
matically draw back into the retractor.
If this does not happen, check the belt to
be sure it is not twisted, then try again.
B210A01NF-1
C020200ABH-EU

Pre-tensioner seat belt

Your vehicle is equipped with driver's and
front passenger's pre-tensioner seat
belts. The purpose of the pre-tensioner is
to make sure that the seat belts fit tightly
against the occupant's body in certain
frontal collisions. The pre-tensioner seat
belts may be activated in crashes where
the frontal collision is severe enough.
OEN036300