The Problem Solver - GE GSD750 Use And Care Manual

PROBLEM
SPOTS AND
FILMING ON
GLASSES AND
CLOUDINESS ON
GLASSWARE
14

THE PROBLEM SOLVER

(continued)
POSSIBLE CAUSE
Spotting can be caused by all these things:
Extremely hard water. (See How to Choose and Use Detergent section).
Improper loading. (See Loading section).
Detergent section).
Rinse agent dispenser empty. (See How to Use a Rinse Agent section).
Too little detergent. (See How to Choose and Use Detergent section).
Local water conditions and personal preferences vary. Try several brands of
detergents to find one that gives the best results for you. A liquid dishwasher
detergent may help reduce filming.
To remove stubborn spots and film from glassware:
1.
Remove all metal utensils from the dishwasher.
2. Do not add detergent.
3. Select POTSCRUBBER cycle.
4. Start the dishwasher and allow to run for 18 to 22 minutes. The dishwasher will
now be in the main wash.
5. Then open the door and pour 2 cups (500 ml) of white vinegar into the bottom of
the dishwasher.
6. Close the door and allow to complete the cycle.
If vinegar rinse doesn't work:
acid crystals instead of vinegar. (Most drugstores carry citric acid
doesn't, call GE Factory Service).
Using a vinegar or citric acid crystal rinse more than twice a month? Consider a home
water softener.
If vinegar or citric acid crystal rinse doesn't work, the cloudiness is "etching."
The film cannot be removed.
Use less detergent if you have soft water. Wash glassware in
It can be prevented:
the shortest cycle that will get them clean.
Water temperature entering dishwasher exceeds 150°F.
Rough handling can cause chipping. Load with care. Make sure glassware and china
are secure and can't jar loose. (See Loading section). Make sure tall glasses and
stemware will clear the top of the tub when you push the rack into the dishwasher.
Always use the top rack for delicate items.
Repeat as above, except use 1/4 cup (60 ml) of citric
yours
crystals. If