Table of Contents
Advertisement
LAMP
REPLACEMENT
1. Unplug the power cord from the outlet.
2. Remove refrigerator shelves.
3. To remove the lamp cover, insert a slotted
driver at the one of
under hole of the lamp cover and pull it out
forwards.
4. Turn the lamp counterclockwise.
5. Assemble in reverse order of disassembly.
Replacement bulb must be the same
specification as original.
GENERAL
INFORMATION
Vacation Time
During average length vacations, you will
probably find it best to leave the refrigerator in
operation.
Place freezable items in freezer for longer life.
When you plan to be away for an extended
period, remove all food, disconnect the power
cord, clean the interior thoroughly, and leave
each door OPEN to prevent odor formation.
12
Power Failure
Most power failures are corrected in an hour or
two and will not affect your refrigerator
temperatures. However, you should minimize the
number of door openings while the power is off.
During power failures of longer duration, place a
block of dry ice on top of your frozen packages.
WARNING
When using dry ice, provide adequate
ventilation.
Dry ice is frozen carbon dioxide (CO
When it vaporizes, it can displace oxygen,
causing dizziness, light-headedness,
unconsciousness, and death by suffocation.
Open a window and do not breathe the vapors.
If You Move
If you move, empty the refrigerator (freezer)
completely and wash a mild solution of baking
soda and water. (2 tablespoons soda to 1 quart
water) Be sure the soda is completely dissolved
to avoid scratching the inside of the refrigerator
(freezer.). Secure any loose items, such as racks,
bins, ice trays, etc. Do not try to move a loaded
refrigerator.
Anti-Condensation Pipe
The outside wall of the refrigerator cabinet may
sometimes be warm, especially just after
installation.
Don't be alarmed. This is due to the
anti-condensation pipe, which pumps hot
refrigerant to prevent sweating on the outer
cabinet wall.
Anti-Condensation
Pipe
DRY ICE
).
2
Advertisement
Table of Contents
