Selecting The Dehumidifying Mode - Samsung MWR-WS00 User Manual

Wired remote controller
Hide thumbs Also See for MWR-WS00:
Table of Contents

Advertisement

Selecting the Dehumidifying Mode

Select the dehumidifying mode if the room is too humid.
Using this mode will slightly lower the room temperature.
1
Press the
(ON/OFF) button to turn on the indoor unit.
(Do not press the
controller is on).
Result:
 T he air-conditioner will be turned on with the
mode selected when the unit was last used.
Caution
The air-conditioner has a built-in protection
mechanism to prevent the unit from being
damaged when it is started immediately after
being:
 Plugged in
 Stopped
The air-conditioner will start up after 3 minutes.
2
To select the DRY mode, press the
displayed on the remote controller.
Result:
The air-conditioner will run in dehumidifying
mode.
3
To adjust the temperature, press the
the desired temperature.
The temperature can be set between 18°C and 30°C.
Result:
 The temperature is adjusted by 1°C when
the
 The fan speed is adjusted automatically in the
dehumidifying mode.
4
To adjust the airflow direction, refer to page 13.
(ON/OFF) button if the remote
button until Dry is
buttons to set
buttons are pressed.
9
E-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents