Setting the Auto Stop Function
20
E-
The wired remote controller can be set to turn off the indoor unit(s)
after a set period of time has passed since any button on the
remote controller was last pressed. This function is used to turn off
the indoor unit in case the user forgets to turn off the indoor unit.
1
Press the
button for 5 seconds to enter the setup
mode.
Result:
The wired remote controller will enter the setup
mode and the menu will dispaly
2
Press the
button to enter the auto stop time setup
mode.
3
The default time setting is . The auto stop time can be set
between 0 and 12 hours.
Note
Time is adjusted by 1 hour when the
buttons are pressed.
Press the
time setup.
Press the
time setup.
4
Press the
button to exit the setup mode.
.
button to save the auto stop
button to cancel the auto stop