Selecting the Cooling Mode
Select the cooling mode to lower the room temperature.
1
Press the
(ON/OFF) button to turn on the indoor unit.
(Do not press the
controller is on).
Result:
T he air-conditioner will be turned on with the
mode selected when the unit was last used.
Caution
The air-conditioner has a built-in protection
mechanism to prevent the unit from being
damaged when it is started immediately after
being:
Plugged in
Stopped
The air-conditioner will start up after 3 minutes.
2
To select the COOL mode, press the
displayed on the remote controller.
Result:
The air-conditioner will run in cooling mode.
3
To adjust the temperature, press the
the desired temperature.
The temperature can be set between 18°C and 30°C.
Result:
The temperature is adjusted by 1°C when
the
The air-conditioner will start cooling if
the temperature set is lower than the room
temperature.
The fan will run even if the temperature set is
higher than the room temperature.
4
Select the fan speed by pressing the
5
To adjust the airflow direction, refer to page 13.
Note
Cooling and heating mode cannot be selected at
the same time.
(ON/OFF) button if the remote
button until Cool is
buttons to set
buttons are pressed.
button.
7
E-