Parrot CK3100 Series Installation Manual page 4

CLIO 2 CLIO 2
1
Insert the removal tools into the
slots on each side of the radio.
3
Using the plastic trim tools,
unclip the Warning panel
without disconnecting it.
5
Using the plastic trim tools,
unclip the panel on the left-hand
side of the dashboard.
This sheet is designed to help you with the installation of a Parrot product and is provided purely for information purposes. The installer is
solely responsible for any installation carried out in accordance with the instructions in this sheet and for the quality of the installation. All
rights reserved © Copyright 2011 PARROT SA, a French Société Anonyme (Public Limited Company) Registered on the Paris Trade and
Companies Register under No. 394 149 496 Reproduction not permitted without authorisation from Parrot SA. Images not contractually
Disassembly 1 / 2
Carefully release the radio, without
pulling it out completely, so that
you can disconnect the connectors
and the antenna. Then completely
remove the radio.
1
2
Remove screws 1, 2 and 3 under
the steering column and remove
the panel.
Remove the door seal on the
driver's side.
2
4
3
6