Do you have a question about the TX1000F and is the answer not in the manual?
Questions and answers
Сергей
May 19, 2025
Здравствуйте! Подскажите пожалуйста,какой момент затяжки шатунные вкладишей на двигателе k3b Исеки TX1510F не где не могу найти
1 comments:
Mr. Anderson
May 23, 2025
The torque specification for the connecting rod bearings on the Iseki TX1510F engine with part number K3B (Kubota K3B engine) is 24–27 ft-lb (32–37 Nm).
This answer is automatically generated
Петр Николаевич Ефремов
May 13, 2025
Здравствуйте. Мне нужен размер сальника задней полуоси
1 comments:
Mr. Anderson
May 21, 2025
The size of the rear axle seal for Iseki TX1000F is not provided in the context.
Need help?
Do you have a question about the TX1000F and is the answer not in the manual?
Questions and answers
Здравствуйте! Подскажите пожалуйста,какой момент затяжки шатунные вкладишей на двигателе k3b Исеки TX1510F не где не могу найти
The torque specification for the connecting rod bearings on the Iseki TX1510F engine with part number K3B (Kubota K3B engine) is 24–27 ft-lb (32–37 Nm).
This answer is automatically generated
Здравствуйте. Мне нужен размер сальника задней полуоси
The size of the rear axle seal for Iseki TX1000F is not provided in the context.
This answer is automatically generated