Do you have a question about the S1300/36 and is the answer not in the manual?
Questions and answers
Amanda Parselle
April 21, 2025
Westwood T1800 The drive belt on the PTO is not turning the collector brushes please help
1 comments:
Mr. Anderson
May 11, 2025
To fix the issue with the PTO (Power Take-Off) drive belt not turning the collector brushes on a Westwood T1800, follow these steps:
1. Check PTO Belt Condition: Inspect the drive belt for wear, cracks, fraying, or stretching. Replace the belt if it is damaged or loose.
2. Verify Belt Tension: Ensure the belt is properly tensioned. A loose belt may slip and not drive the brushes. Adjust the tension according to the manufacturer's specifications.
3. Inspect Pulleys: Look at the PTO pulley and brush drive pulley. Make sure they are clean, aligned, and not worn or damaged. Misaligned or worn pulleys can prevent proper belt operation.
4. Check PTO Clutch Operation: Make sure the PTO clutch engages correctly. If it is an electric clutch, check wiring and connections. If manual, inspect the linkage for damage or misadjustment.
5. Look for Obstructions: Ensure that nothing is blocking the brush drive system or the belt path.
6. Brush Gearbox and Bearings: Check that the brush gearbox and bearings turn freely. Seized or stiff components can prevent the brushes from turning even if the belt is moving.
7. Test Operation: After inspection and any necessary replacements or adjustments, start the engine, engage the PTO, and observe if the brushes turn properly.
If the belt and all components are in good condition and properly adjusted, the collector brushes should operate as intended.
This answer is automatically generated
wolfe harth
April 16, 2025
what is the number of the suggested spark plug for B and S motor?
1 comments:
Mr. Anderson
May 9, 2025
The recommended spark plug for the Westwood S1300/36 with a Briggs & Stratton (B&S) engine is typically a Champion RJ19LM or an equivalent such as NGK B2LM. Always confirm the exact engine model on the mower to ensure compatibility.
This answer is automatically generated
Lucio Cotzia
May 11, 2025
Mi serve uno schema elettrico dettagliato **** i colori dei cavi e i collegamenti tra blocchetto di accensione, solenoide, batteria, motorino di avviamento. Quello del manuale non ha i colori dei cavi e il mio trattorino usato è stato manomesso dal precedente proprietario. Grazie.
w. Harth
April 16, 2025
what is the number of the suggested spark plug?
1 comments:
Mr. Anderson
May 8, 2025
The suggested spark plug number for the Westwood S1300/36 is Champion RJ19LM.
Need help?
Do you have a question about the S1300/36 and is the answer not in the manual?
Questions and answers
Westwood T1800 The drive belt on the PTO is not turning the collector brushes please help
To fix the issue with the PTO (Power Take-Off) drive belt not turning the collector brushes on a Westwood T1800, follow these steps:
1. Check PTO Belt Condition: Inspect the drive belt for wear, cracks, fraying, or stretching. Replace the belt if it is damaged or loose.
2. Verify Belt Tension: Ensure the belt is properly tensioned. A loose belt may slip and not drive the brushes. Adjust the tension according to the manufacturer's specifications.
3. Inspect Pulleys: Look at the PTO pulley and brush drive pulley. Make sure they are clean, aligned, and not worn or damaged. Misaligned or worn pulleys can prevent proper belt operation.
4. Check PTO Clutch Operation: Make sure the PTO clutch engages correctly. If it is an electric clutch, check wiring and connections. If manual, inspect the linkage for damage or misadjustment.
5. Look for Obstructions: Ensure that nothing is blocking the brush drive system or the belt path.
6. Brush Gearbox and Bearings: Check that the brush gearbox and bearings turn freely. Seized or stiff components can prevent the brushes from turning even if the belt is moving.
7. Test Operation: After inspection and any necessary replacements or adjustments, start the engine, engage the PTO, and observe if the brushes turn properly.
If the belt and all components are in good condition and properly adjusted, the collector brushes should operate as intended.
This answer is automatically generated
what is the number of the suggested spark plug for B and S motor?
The recommended spark plug for the Westwood S1300/36 with a Briggs & Stratton (B&S) engine is typically a Champion RJ19LM or an equivalent such as NGK B2LM. Always confirm the exact engine model on the mower to ensure compatibility.
This answer is automatically generated
Mi serve uno schema elettrico dettagliato **** i colori dei cavi e i collegamenti tra blocchetto di accensione, solenoide, batteria, motorino di avviamento. Quello del manuale non ha i colori dei cavi e il mio trattorino usato è stato manomesso dal precedente proprietario. Grazie.
what is the number of the suggested spark plug?
The suggested spark plug number for the Westwood S1300/36 is Champion RJ19LM.
This answer is automatically generated