Sylvania CD202SL8 Service Manual page 21

2. Setting for BRIGHT, CONTRAST,
COLOR, TINT, V-TINT and
SHARP Data Values
<TV/VIDEO mode>
1. Enter the Service mode in TV/VIDEO mode.
2. Press [PICTURE] button on the service remote
control unit. Display changes "BRT," "CNT," "CLR,"
"TNT," "V-TNT," and "SHP" cyclically when
[PICTURE] button is pressed.
BRIGHT (BRT)
1. Press [PICTURE] button on the service remote
control unit. Then select "BRIGHT" (BRT) display.
2. Press [CH. o / p] buttons on the service remote
control unit so that the value of "BRIGHT" (BRT)
becomes 90.
CONTRAST (CNT)
1. Press [PICTURE] button on the service remote
control unit. Then select "CONTRAST" (CNT)
display.
2. Press [CH. o / p] buttons on the service remote
control unit so that the value of "CONTRAST"
(CNT) becomes 80.
COLOR (CLR)
1. Press [PICTURE] button on the service remote
control unit. Then select "COLOR" (CLR) display.
2. Press [CH. o / p] buttons on the service remote
control unit so that the value of "COLOR" (CLR)
becomes 58.
TINT (TNT)
1. Press [PICTURE] button on the service remote
control unit. Then select "TINT" (TNT) display.
2. Press [CH. o / p] buttons on the service remote
control unit so that the value of "TINT" (TNT)
becomes 56.
V-TINT (V-TNT)
1. Press [PICTURE] button on the service remote
control unit. Then select "V-TINT" (V-TNT) display.
2. Press [CH. o / p] buttons on the service remote
control unit so that the value of "V-TINT" (V-TNT)
becomes 56.
SHARP (SHP)
1. Press [PICTURE] button on the service remote
control unit. Then select "SHARP" (SHP) display.
2. Press [CH. o / p] buttons on the service remote
control unit so that the value of "SHARP" (SHP)
becomes 40.
<DTV mode>
1. Enter the Service mode in DTV mode.
2. Press [PICTURE] button on the service remote
control unit. Display changes "C-CNT," "C-CLR,"
"C-TNT," and "C-SHP" cyclically when [PICTURE]
button is pressed.
CONTRAST (C-CNT)
1. Press [PICTURE] button on the service remote
control unit. Then select "CONTRAST" (C-CNT)
display.
2. Press [CH. o / p] buttons on the service remote
control unit so that the value of "CONTRAST" (C-
CNT) becomes 80.
COLOR (C-CLR)
1. Press [PICTURE] button on the service remote
control unit. Then select "COLOR" (C-CLR)
display.
2. Press [CH. o / p] buttons on the service remote
control unit so that the value of "COLOR" (C-CLR)
becomes 62.
TINT (C-TNT)
1. Press [PICTURE] button on the service remote
control unit. Then select "TINT" (C-TNT) display.
2. Press [CH. o / p] buttons on the service remote
control unit so that the value of "TINT" (C-TNT)
becomes 56.
SHARP (C-SHP)
1. Press [PICTURE] button on the service remote
control unit. Then select "SHARP" (C-SHP)
display.
2. Press [CH. o / p] buttons on the service remote
control unit so that the value of "SHARP" (C-SHP)
becomes 40.
6-2 P7450EA